EXTRUDER E-150

APPLICATION

The extruder is designed for production of:

  • mixed feed with increased digestibility  for livestock, domestic animals: cattle, swine and poultry 

 

ADVANTAGES

  • provides a high quality feed;
  • saves over 40 % of grain for animal feeding;
  • uses raw material effectively;
  • controls the quality of the mixed feed;
  • purifies the low-quality raw material from bacteria

 

RAW MATERIAL

wheat, rye, corn, barley, amaranth, pea, lupine and other grain crops

  • Parameter Value
  • Capacity, kg/hour: 150
  • Length, mm: 1700
  • Width, mm: 750
  • Width, mm: 2000
  • Power, kW: 19
  • Weight, kg: 700

The raw material processing is made by dry extrusion method. It means that the mixture is affected by pressure and heat only.

The first step is the pretreatment of raw material. It must have the proper moisture and must be cleaned from metal residues and any waste.

Raw material is fed from a hopper into screw barrel. Magnet catcher is installed within a hopper so it can catch any metal residues you’ve missed. Inside the barrel there is a screw that conveys the raw material forward to outlet die.

Extrusion is a process of thermal treatment, sterilization, dehydration, texturing and granulating of the final product.

The product goes through the barrel while the heat is progressively increased.

During this process most potentially harmful bacteria and viruses are killed, inhibitor trypsin level in extruded soy is reduced.

The final product is shaped by forcing out through the die.

Share: