OIL PRESS RP-1000 F
TECHNICAL SPECIFICATIONS
Productivity by the amount of processed material, up to
1200 kg / hour
Humidity of raw materials before the press
6…8 %
Residual oil cake, after the press
22…26 %
Solid particles in oil, no more
3 %
Length
3970 mm
Width
960 mm
Height
2200 mm
Weight, no more
6940 kg
Installed capacity
45,6 kW
This press is designed for pre-pressing oil from heated sunflower (or rapeseed) oil.
The pressing product is a semi-skimmed cake: with an oil content of 22 … 26%
Used in the technological scheme:
ADVANTAGES
Warranty period – 1 year
SEQUENCE OF OPERATION
The raw material enters the funnel of the press: from the roaster.
The feed is controlled by the feeder speed.
The screw shaft moves the raw material from the loading unit to the pressing unit.
The diameter of the cavities of the screws increases, the free volume of raw materials decreases. This leads to compression and grinding of the seeds. The process of grinding seeds under pressure heats up the mass and leads to the extraction of vegetable oil.
The oil flows into the collection chamber created by the elements of the press frame, then through the nozzle at the bottom of the press it is discharged into the workshop oil collection system.
The cake continues to move along the pressing unit, and at the exit it is crushed by an impeller and removed from the press into the shop cake transportation system.
Leave your message and contact details and our specialists will contact you during the day!