Oil press RP-1500
FINAL PRODUCT
RAW MATERIALS
TECHNICAL SPECIFICATIONS
Productivity by the amount of processed material, kg/h
max 1500
Residual oiliness of the cake after the press, %
10
Moisture content of raw materials before the press, %
4…6
The number of revolutions of the working shaft, rev/min
21
Contamination of raw materials, %
max 1
Rash from the press, %
max 3
Longueur, mm
3970
Width, mm
960
Height, mm
2200
Weight (without electric cabinet), kg
max 6900
Installed power, kW
56
The press is intended for completing the oil pressing line from oil crops (rapeseed, sunflower) as a second pressing press.
The raw material (cake after the press of the first pressing) is fed into the receiving funnel.
The electric motor through the V-belt transmission and the reducer turns the screw shaft, which feeds the raw material into the seer chamber and further transports it in the direction of the output unit. In the direction of movement of raw materials, the inner diameter (diameter of the depressions) of the screws increases, and the pitch of the screw surface decreases, which leads to a decrease in the free volume of the chamber for raw materials.
As a result, the raw material is compressed, which is accompanied by the release of oil. The oil comes out through the slits of the sight chamber and drains into the pan.
The cake coming out of the viewing chamber is crushed and removed from the press into the workshop cake transportation system.
QUALITY ASSURANCE
The warranty period for the use of the press is 24 months from the date of commissioning of the equipment, except for replaceable parts of the working part.
Warranty for replaceable parts of the working part – 12 months.
